| 首页 > 跨国采购买家 > 跨国采购买家 | |||
| # 21241. 56" 3d Bend Bos | |||
| 发布时间： 2024-6-28 浏览：7 | |||
|
发 布 人：todaytex 发布人：QQ 1407106692 ; 微信：1407106692 联系网址：http://www.todaytex.com |
|||
|
公司：# 21241. 56" 3d Bend Bos 国家：follow 联系人：follow 地址： 详细内容 Dear Sir,Please offer us CIF Kuwait basis if you can produce and or locate fromapproved companies by Kuwait.#21241. 56" 3D BendThe above number appears on all correspondence.All disputes in relation to this document(s) shall be finally settled by arbitration in Korea MATERIAL ASTM A234 WPB, NACE MR 0175/ISO 15156, HICRESISTANCE IN ACCORDANCE WITH NACE-TM-02841. 56" Dia. x 0.688" thick, 3D BW 15 Deg Elbow ? 4 Nos.2. 56" Dia. x 0.688" thick, 3D BW 30 Deg Elbow ? 2 Nos.3. 56" Dia. x 0.688" thick, 3D BW 38 Deg Elbow ? 1 No.4. 56" Dia. x 0.688" thick, 3D BW 45 Deg Elbow ? 3 No.INITIAL DOCUMENTATION UPON PLACEMENT OF ORDER.ITP / Quality Plan Manufacturing procedure Inspection / Testing procedures NDT procedures Also, please be informed that during the manufacturing stage, the following documents shall be required:Before starting the manufacturing, HIC (Solution A) report for raw materials shall be forwarded. All welding to be carried out as per the approved WPS / PQR& WPQ. A copy to be forwarded. HIC (Solution A) report for finished Bends to be forwarded. Pigging to be carried out on the finished bends and inspection report to be forwarded. Additional Requirements for 56" 3D Bends1) Chemical Composition required to be met with? CE ? 0.43% (max)? Mn ? 1.35% (max)? S ? 0.005% (max)? Ca ? 0.0065 % (max)2) HIC according to NACE TM 0284 Solution A, CTR < 5%, CLR < 15%, CSR < 2% based on average of 3 specimens.3)? Material ASTM A234 WPB conforming to NACE MR 0175? Minimum Wall Thickness should be 17.48mm (at all locations)? Marking as per B16.49? All Bends shall be Wrinkle & Bubble free? R/T 100% incase of Welded Pipes after complete forging? MPI 100% of Weld Edge Preparation & 25 mm on the both sides of Weld edge? UT Weld area & Weld edge preparation on both ends & 25 mm on the both sides of Weld edge4) Bending qualification test (BPQ) One procedure qualification test bend of the same lot of each size shall be formed first with the same manufacturing procedure and applicable parameters. The visual & dimensional inspection of the same shall be carried ou and shall be confirmed to meet the dimensional & visual requirements. Upon satisfactory performance of the production bend, the lot production shall commence.Best regardsBeno ParkGeneral Manager 联系方式 Email flourish@emirates.net.ae 公司名 GODLEY AUCTION CO 国家 美国 联系人 Margaret Godley 地址 4918 Rozzells Ferry Rd., Charlotte, NC 28216, USA 电话 001 704-399-9756 [hide]其他[/hide]Email mostwell@tm.net.my,liandung@mail.liandung.com.tw,info@peterstevens.com.au,i-prado@aiibeauty.com,livtony@hotmail.com, 电话：above 传真： above 邮箱：above 网址：above 采购本类产品及：above |
|||